Green Tap Installation.

The wires on some machines are too small for the red T-Tap connectors to work.  The green tap connectors will make better connections on these machines....

Place existing machine wire fully into the side of the green connector (as shown with the black wire.)  Make sure it is all the way into the connector and straight.  Then push the appropriate wire from the AutoStop all the way into the other hole in the connector (as shown with the red wire).  Make sure it goes all the way in.  Then squeeze the connector together using a pair of pliers on the green and clear top and bottom.

The wires on some machines are too small for the red T-Tap connectors to work.  The green tap connectors will make better connections on these machines....

Place existing machine wire fully into the side of the green connector (as shown with the black wire.)  Make sure it is all the way into the connector and straight.  Then push the appropriate wire from the AutoStop all the way into the other hole in the connector (as shown with the red wire).  Make sure it goes all the way in.  Then squeeze the connector together using a pair of pliers on the green and clear top and bottom.